Grinding Mill Suppliers

SCM Super Thin Mill

How To Work For SCM super thin mill

The main motor drives main axle and every layer rotating by the power of reducer. Dial drives numbers of rollers rolling and rotating in the ring by pintles. Big materials are crushed into small particles by hammer crusher. Then they are sent to store house by elevator. Vibrating feeder send the materials evenly to the middle of the upper dial. Under the function of the eccentricity, the materials fall into the ring to be pressed, crushed and milled into pieces by rollers. After the first crush, materials fall into the second and third layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be brought into the classifier.

SCM super thin mill Overview

On the basis of more than 15 years’ production experience of Shibang company, we absorb technology advantages from the same field abroad and domestic, organizing elite powder processing experts to investigate, research, try again and again; finally, we develop this high-efficiency and low-cost SCM Series Super Thin Grinding Mill. SCM Series Super Thin Grinding Mill is much suitable to deal with the powder processing of mineral products in industries.

SCM super thin mill Application

SCM Series Super Thin Grinding Mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, Fertilizer and mining etc. The SCM Series Super Thin Grinding Mill can produce powder from non-flammable and non-explosive mineral materials with Mohs hardness below 9 and humidity below 8%, such as barite, limestone, quartz, calcite, granite, porcelain clay, basalt, gypsum etc.

SCM super thin mill Main Features and Benefits

1. High efficiency. Under the same condition of finished particle size and power of motor, the output is 40% higher than airflow mill and whisk mill.
2. Environmental protection. Pollution and noise are lightened by using deduster and muffler so as to reach the requirement of national environmental protection.
3. High safety. No axle tree or bolt is used in the grinding chamber, so there will be no worn out problem of bearing and sealing parts, and also no loose of bolts.
4. Finished size can reach to d97≤5μm.
5. High using rate of spare parts.

SCM super thin mill Parameters

SCM Series Super Thin Grinding Mill Main Technical Data

Model	SCM6015	SCM8021	SCM10027
Number of Roller (piece)	15	21	27
Ring Diameter (mm)	Φ600	Φ800	Φ1000
Number of Ring (piece)	1×3	1×3	1×3
Mai n Equipment Rotate Speed (r/min）	235	235	173
Max. Inlet Size (mm)	≤10	≤10	≤20
Final Size (mesh)	325~2500	325~2500	325~2500
Capacity (kg/h)	325~2500	600~4000	900~6800
Overall Size (m)	10×2.3×5.5	13×3×5.8	18×4×8.6

SCM Series Super Thin Grinding Mill Technical Data

Name	Item	Unit	Specification and Technical Data
			SCM6015	SCM8021	SCM10027
Motor of Main Machine	Model		Y225s-4	Y250M-4	Y315S-4
	Power	KW	37	55	110
Classifier Frequency Modulation Motor	Model		Y160M-4	Y180M-4	Y200L1-4
	Power	KW	11	18.5	30
Motor of Elevator	Model		Y100L-4	Y100L-4	Y100L-4
	Power	KW	3	3	3
Motor of Blower	Model		Y200L1-2	Y225M-2	Y280M-2
	Power	KW	30	45	90
Hammer Crusher	Model		PC250X400	PC300X400	PC400X600
	Power	KW	15	15	18.5
Vibrating Feeder	Model		GZ1F	GZ1F	LS180X1050
	Power	KW	0.06	0.06	0.2
Discharge　Value	Model		ZJD1:40	ZJD1:40	ZJD1:40
	Power	KW	0.75	0.75	0.75
Pulsed Duster	Model		DMC72-Ⅱ	DMC120-Ⅱ	DMC120-Ⅱ